Spanish
English
French
Home   /  Gas regulation   /  Economizers   /  GasFree
GasFree

GasFree

Ref. 37900000
Description

Pressure regulator for bottle - Save up to 50%

Features

The gas-saving systems of Gala Gar reduce gas pressure supplied to the process of maintainance the necessary flow for a high-quality process. The saving-level varies depending on the number of pauses and beginnings produced in the welding process, being the greatest in spot welding and in a short cords.

4 big benefits:

Time saving

The use of such equipment lengthens a gas cylinders’ life which entails less time consumption to change the bottle which saves an operator time, it means higher productivity.

Environmental improvement
These devices eliminate unnecessary loss of gas during the welding process contributing an energy saving and unnecessary gas emissions to the atmosphere which does not provide any improvement to the process.

Higher welding quality
The gas flow rate peaks at the beggining of welding can cause defects by pores produced by excessive shielding gas

And of course cost savings
Less gas consumption implies a cost savings which, at the same time, leads to greater competitiveness of the company.
The gas-saving equipment GasFree can save up to 50% of gas consumption.


Gas of use
AR-CO2
Inlet pressure (bar)
200
Flow (Nm3/h)
30

We have a well-qualified personnel to advise of your current installation and propose a customized solution to optimize a gas consumption.


Gas free is save

Ø de electrodo 4 mm

200 A/35%

  • Ø electrode 4 mm
  • 200 A/35%
  • Suitable for generating set
  • Ø Electrode 3,25 mm
  • 160 A/ 30%
  • Suitable for generating set
  • Ø Electrode 4 mm
  • 200 A/ 35%
  • Suitable for generating set
  • Ø max. Electrode 4,00 mm
  • 200 A/ 35%
  • Suitable for generating set
  • Cellulosic electrode
  • Tig Pulse
  • High frequency
  • 200 A/35%
     
  • Tig Pulse
  • High frequency
  • 170 A/30%
  • Ø wire 1 mm
  • 230 A/ 60%
  • Ø wire 1,2  mm
  • 300 A/ 60%
  • Ø wire 1,2 mm
  • 300 A/ 60%
  • Ø wire 1,2 mm
  • 380 A/ 60%
  • Ø wire 1,2 mm
  • 425 A/ 60%
  • Ø wire1,6 mm
  • 550 A/ 60%
  • Air carbon
  • 200 A/35%
  • Multiprocess welding: MMA.TIG, MIG-MAG

200 A/35%
Multiprocess (MMA, TIG, MIG-MAG)

  • 200 A/35%
  • Multiprocess (MMA, TIG, MIG-MAG, MIG-MAG BIPULSE)
  • 400 A/45%
  • Multiprocess: MMA, TIG, MIG-MAG, MIG-MAG bipulse
  • 300 A/45%
  • Welding multiprocess: MMA, TIG, MIG-MAG, MIG-MAG BIPULSE
  • Multiprocess welding: MIG-MAG/TIG/ELECTRODE
  • 500 A/45%
  • BI-PULSE WELDING
  • Tig Pulse
  • High frequency
  • 320 A/35%
  • AC welding- Aluminum welding
GALAGAR ESPAÑA
976 473 410
info@galagar.com
Gala Gar, S.L.
Jaime Ferrán 19
(Polígono Cogullada)
50014 ZARAGOZA
ESPAÑA

GALAGAR MÉXICO
+52 (55) 53350344
+52 (55) 53683175
galagar@nortesol.com.mx
Gala Gar México
Poniente 152 # 888
Col. Industrial Vallejo, 02300
Delegación Azcapotzalco
MÉXICO D.F.

GALAGAR ARGENTINA
011 4729 0735 / 0748
galagarargentina@galagar.com
Gala Gar Argentina
C/ Soto y Calvo 3650
1655 José León Suárez
Buenos Aires
ARGENTINA

GALAGAR NEWSLETTER
Subscribe right now.
You will receive information about new products, offers and discounts on our products.
@
I have read and accept the privacy conditions.
SUBSCRIBE