English
>French
Home   /  Welding and Cutting   /  Plasma   /  Plasma cutting   /  Smart CUT 45 PFC
SmartCUT-45PFC_pq

Smart CUT 45 PFC

Ref. 2230045PFC
Description

Single-phase inverter equipment for electric plasma cutting blown with compressed air. Cutting of all types of electrically conductive materials: steel, stainless steel, aluminium, brass, etc.

    

Maximum Steel Cutting Thickness

Maximum quality (0.5 m/min): 8 mm
Maximum (0.24 m/min): 12 mm
Maximum separation (0.15 min): 15 mm

Features

Main advantages:
-Small dimensions, high portability (10 kg)

-High energy efficiency. Low electrical consumption.

-Continuous electronic regulation (20÷45 A).

-Maximum steel cut up to 15 mm thickness-45 A/35%

-Torch ignition without HF. No EMF disturbances.

-Back Stricking" Ignition System, high consumable life.

-Possibility of cutting grids.

-2T/4T Pulse mode (With safety system)


Ppower supply
1ph, 230 V
Maximum absorbed power
5.3 / 2.8 KVA
Cutting intensity
35% 45 A
Weight
10 Kg
Dimensions
165 x 439 x 328 mm.
Accesories
1609631
PT-40 antorcha manual, 6 m longitud, cable coaxial

Included:

PT40 torch and mass cable


GALAGAR ESPAÑA
976 473 410
info@galagar.com
Gala Gar, S.L.
Jaime Ferrán 19
(Polígono Cogullada)
50014 ZARAGOZA
ESPAÑA

GALAGAR MÉXICO
+52 (55) 53350344
+52 (55) 53683175
galagar@nortesol.com.mx
Gala Gar México
Poniente 152 # 888
Col. Industrial Vallejo, 02300
Delegación Azcapotzalco
MÉXICO D.F.

GALAGAR ARGENTINA
011 4729 0735 / 0748
galagarargentina@galagar.com
Gala Gar Argentina
C/ Soto y Calvo 3650
1655 José León Suárez
Buenos Aires
ARGENTINA

GALAGAR NEWSLETTER
Subscribe right now.
You will receive information about new products, offers and discounts on our products.
@
I have read and accept the privacy conditions.
SUBSCRIBE